Monel Alloy
502
Get a Free Quote NOW
Send Inquiry and Get Our Latest Full Set Data Sheet
Monel 502 Introduction
Precipitation
Strengthened Alloy
Resistance
Behavior
Overview
As a leading supplier & manufacturer in China, AEETHER supply cost-effective Monel 502 Products.
Monel 502™ is a nickel-copper alloy. It can be machined similar to that of austenitic stainless steels. It can be formed using conventional techniques and can be welded using conventional methods.
Monel 502™ reacts to heat treatment and annealing. It is annealed at 1038°C (1900°F) followed by quenching in water and it is forged at 1010 to 1149°C (1850 to 2100°F) followed by quenching in water. Monel 502™ is hot worked at 872 to 1149°C (1600 to 2100°F). It can be cold worked using conventional methods.
Monel 502™ is aged at temperatures ranging from 594 to 608°C (1100 to 1125°F) followed by cooling in a furnace.
Applications
Monel 502™ is used in the following applications:
- Fasteners
- Pump shafting
- Propeller shafts
- Valve components
Monel 502 Chemical Composition
S ≤ 0.010%
Si ≤ 0.50%
C ≤ 0.10%
Mn ≤ 1.50%
Al: 2.50% ~ 3.50%
Ti ≤ 0.50%
Fe ≤ 2.0%
Cu: 21.9% ~ 29.9%
Ni: 63.0% ~ 70.0%
Try our Premium Products
Get a Free Quote NOW
Data Sheet
Mechanical Properties
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 1158 MPa | 167954 psi |
| Yield strength | 1034 MPa | 149969 psi |
| Elastic modulus | 190-210 GPa | 27557-30458 ksi |
| Poisson's ratio | 0.27-0.30 | 0.27-0.30 |
| Elongation | 15% | 15% |
| Reduction of area | 53% | 53% |
| Hardness | 335 | 335 |
Monel 502 Applications
Related Article
More Monel Grades +
400
S ≤ 0.024%
Si
Si ≤ 0.50%
C
C ≤ 0.30%
Mn
Mn ≤ 2.00%
Fe
Fe ≤ 2.5%
Cu
Cu: 28.0% ~ 34.0%
Ni
Ni ≥ 63.0%
401
S ≤ 0.015%
Si
Si ≤ 0.25%
C
C ≤ 0.10%
Mn
Mn ≤ 2.25%
Co
Co ≤ 0.25%
Fe
Fe ≤ 0.75%
Cu
Cu: 51.4% ~ 56.4%
Ni
Ni: 40.0% ~ 45.0%
404
S ≤ 0.024%
Si ≤ 0.10%
C
C ≤ 0.15%
Mn ≤ 0.10%
Ni + Co: 52.0% ~ 57.0%
Al ≤ 0.05%
Fe
Fe ≤ 0.50%
Cu
Cu: 42.1% ~ 47.1%
Ni
Ni: 52.0% ~ 57.0%
R-405
S: 0.025% ~ 0.060%
Si
Si ≤ 0.50%
C
C ≤ 0.30%
Mn
Mn ≤ 2.00%
Fe
Fe ≤ 2.5%
Cu
Cu: 28.0% ~ 34.0%
Ni
Ni ≥ 63.0%
K-500
S ≤ 0.010%
Si
Si ≤ 0.50%
C
C ≤ 0.18%
Mn
Mn ≤ 1.50%
Al
Al: 2.30% ~ 3.15%
Ti
Ti: 0.35% ~ 0.85%
Fe
Fe ≤ 2.0%
Cu
Cu: 27.0% ~ 33.0%
Ni
Ni ≥ 63.0%
502
S ≤ 0.010%
Si
Si ≤ 0.50%
C
C ≤ 0.10%
Mn
Mn ≤ 1.50%
Al
Al: 2.50% ~ 3.50%
Ti
Ti ≤ 0.50%
Fe
Fe ≤ 2.0%
Cu
Cu: 21.9% ~ 29.9%
Ni
Ni: 63.0% ~ 70.0%